PRODUCT INTRODUCTION
Cemented Carbides with Both High Hardess and Strength
F Series
- Corrosion
Resistance ※ - Wear
Resistance
※Only for FD25 and FRT15
FD25 adopts ultrafine grained WC. FD15 and FRT15 adopt fine grained WC. All of them exhibit excellent wear resistance. It is particularly suitable for tools requiring exceptional wear resistance or blades.
Properties
| Grades | Grades Classification Symbol | Specific Gravity |
Hardness (HRA) |
Transverse Rupture Strength (GPa) |
Fracture Toughness (MPa・m½) |
|---|---|---|---|---|---|
| FD25 | VF-20 | 13.90 | 92.0 | 3.9 | 11 |
| FD15 | VF-30 | 14.25 | 91.0 | 3.3 | 12 |
| FRT15 | VF-40 | 14.10 | 90.5 | 3.3 | 14 |
※All data shown are typical values, not guaranteed values.
※We will not compensate any loss and damage caused by using all data.
※We reserve the right to modify the data due to technical progress.
Characteristics
-
- Hardness and Binder Phase Content of FD・Series
- F Series has higher hardness in comparison with other Cemented Carbides with same Cobalt (Co) content.
-
- FD25 Microstructure
Typical Applications
- Dies
- Punches
- Die
- Blades
- Gauge
- Rolls
- Dies for Molding Resins
- Dies for Molding Glass
- Bushes
- Pots/Plungers
